|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
 Ultratec fx Power Fog Industrial 9D
 |
 |
|
Click to enlarge image(s)
|
Ultratec continues to develop practical products by introducing the Power Fog Industrial 9D Fog Machine. It is built with our 1400 Watt Heat Exchanger and is rotated 90 degrees in the stainless steel chassis. The Power Fog Industrial also has a standard 2-Channel DMX control Interface. This machine was created to eliminate the challenges associated when installing fog effects under stages, or in close and confined spaces. Simply rotate the machine into the desired position. There are rubber feet and plastic glides already fixed to the machine for stability. The Power Fog 9D is also used extensively in the Low Smoke Generators to decrease the size and allow for greater flexibility.
An Optional Show Control or Timer/ Duration Remote are available.
|
Length: 20 " 50 cm
|
Width: 10 " 25 cm
|
|
Height: 9 " 22 cm
|
Power Cord: 6 Feet
|
|
Net Weight: 29 lbs
|
Net Weight /w Fluid: 32 lbs
|
|
Heater Watts: 1,400 Watts
|
Rating: 13 amps AC @ 110 volts @ 50/60 hz
|
|
Regulatory Compliance: CSA-certified for the US and Canadian markets, to the applicable US and Canadian standards
|
|
|
Output:
|
|
|
Fog RunTime: Continuous
|
Reheat Time: None
|
|
Fluid Consumption: Burst - 127 cc/ min. - Continuous - 57 cc/ min.
|
Competitive Comparison: 20,000cfm
|
|
Technical Benchmark Spec.: Continuous - 4,000 cfm @ 1 meter visibility; Burst - 8,900 cfm @ 1 meter visibility
|
|
|
Heavy-Duty Stainless Steel Chassis
|
Powder Paint Black Finish
|
|
Rapid Change Heat Exchanger Design
|
Built-in DMX Control
|
|
5-Pin DMX Connectors
|
LED DMX Indicator
|
|
Steel Construction Remote Control
|
Variable Fog Level
|
|
RJ45 Locking Connector to Remote
|
Remote On/Off Switch
|
|
Termincal Strip Connection for Show Control (Dry Contacts)
|
|
|
Specification Footnote: The Power Fog Industrial 9D with Air Option is capable of creating different effects such as a simple wispy steam effect to a large burst of fog that will be very effective for those demanding applications. Professional Special Effects specifications are now requesting this machine as the new standard. When using the built in 2-Channel DMX, the first DMX channel controls the fog output and the second DMX channel controls the air on/off function.
|
|
|
The fog and air can also be controlled from the standard remote by setting the DMX channels to 555, the Duration Potentiometer then controls the Air On/Off Control. To control the air pressure, an Air Regulator with standard quick connecters comes with the unit.
|
|
|
|
|
|
|
|
Copyright © Accenting Images Inc. 815.788.8586
sales@accentingimages.comAll orders are secured by VeriSIgn and Security Metrics
|
|
|
