Video Paint / Ultimatte
![]() |
| Click to enlarge image(s) |
Rosco Ultimatte Paints are recommended for interior and exterior surfaces including fabrics, wallboard, plastics, plaster, brick, and concrete.
Ultimatte Paints have been designed for use with the Ultimatte System. However they can be used with Chroma Key systems as well. They provide optimal luminance and color separation when shot on either film or video.
| Specifications | |
| FINISH: Matte | |
| SOLVENT: Water | |
| BINDER TYPE: Vinyl Acrylic | |
| DILUTION: Use straight out of the can. | |
| SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabrics, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough prime as a final preparation. | |
| APPLICATION: Stir contents before use. Do not shake. Apply by brush, roller, or spray gun. Apply in thin, even, uniform coats, using a good quality brush or roller. Use overlapping strokes, keeping a wet edge. Change roller direction often to avoid patterns and streaking. | |
| FILM THICKNESS: 2 mil. Dry Film. | |
| COVERAGE: Appx 300 sq. ft. per gallon. | |
| AVG. DRY TIME: AT 75°F (24°C) Dries to the touch in 30 minutes. Can be re-coated in 1-2 hours. | |
| CLEAN-UP: Soap and water. | |
| SHELF LIFE: Minimum 24 months from purchased date. | |
| CAUTIONS: Do not apply when surface or air temperatures are below 50°F. Keep from freezing. Avoid prolonged contact with skin or breathing of spray. Do not take internally. Use adequate ventilation. KEEP OUT OF REACH OF CHILDREN. |

