Rosco ColorCoat Paint
 |
|
Click to enlarge image(s)
|
Acrylic water borne enamel
durable water borne modified acrylic enamel which provides superior adhesion and abrasion resistance. For use on most interior and exterior surfaces where maximum durability is required. Excellent for use over primed or previously painted metal, wood and concrete. Recommended for use on floors and scenic elements that endure heavy traffic and excessive handling. High Gloss, Interior/Exterior Use, Excellent Color Retention, Extremely Durable, Water Base.
Click here to View Color Chart. Please note that the paint swatch samples shown on this Web site are the closest values displayed in Truecolor (24 bit). Your results may vary.
Download MSDS
|
SUGGESTED USE: ColorCoat is ideal for most scenic materials both interior and exterior. Use on primed fiberglass, steel, wood, aluminum and masonite. Clear ColorCoat is an excellent sealer over all Rosco paints.
|
|
|
APPLICATION: Apply by brush, roller or spray. Surface should be clean, dry and free of dust and grease. Glossy areas should be sanded lightly prior to application. Thinning is not recommended.
|
|
|
FINISH: High Gloss.
|
|
|
BINDER TYPE: Modified Acrylic.
|
|
|
SOLVENT: Water.
|
|
|
COVERAGE: Approximately 300-350 square feet per gallon.
|
|
|
DRYING TIME: Dries to the touch in 1 hour, may be recoated in 4 hours.
|
|
|
CLEAN-UP: Soap and warm water.
|
|
|
All technical data, recommendations and service are accurate to the best of our knowledge. Rosco assumes no responsibility for the results obtained or damage incurred from use by the buyer in whole or in part since method of application and its use is beyond our control.
|
|
